Blue_Lantern
Tall black 5U module panel with black CH1, CH2, CH3, CH4, NOISE and DECAY knobs, red RAND/CH1 and SPECTRAL/DRY toggles, a small LED, and large jacks for CH1 to CH4, TRIG, OUT VCA, OUT S&H and OUT SUM.
MU 5U Mixer, VCA and Decay, photo 1 of 3
Side view of the 5U mixer module resting in a wooden frame, showing three black knobs, a red toggle, stacked circuit boards on brass standoffs and four large jacks.
MU 5U Mixer, VCA and Decay, photo 2 of 3
Back of the 5U mixer module: a black circuit board with surface-mount parts, MTA-100 and MTA-156 power connectors, and a jack board labeled 1MU-MIXER JACK PCB with pads for CH1 to CH4, TRIG and the outputs.
MU 5U Mixer, VCA and Decay, photo 3 of 3

Utilities // MU 5U

MU 5U Mixer, VCA and Decay

Mixer, VCA and decay with noise, MU 5U. From Blue Lantern Modules, Phoenix, Arizona.

$125.00
Format
MU 5U
Ships
Fully assembled, with its power cable
Stock
3 in stock
Email to buy

Say which panel color you want, if there is a choice.

Ships worldwide. 30-day returns.

Specs, manual and demos in the library

About this module

Format: Mu Format. Dot Com Compatible Module. Box11 compatible.

Power Connector: MTA100 Dot Com

What does this do?

This is a 4 channel audio mixer with a summer output, and vca out put. The signal path is mono. Channel 5 is white noise. You can use this as a mixer, or percussion generator. There is an onboard envelope generator, with Decay. The trigger input jack is used to activate the envelope. The same trigger input is 'clock' for the internal sample and hold circuit. The toggle switch is used to sample and hold white noise, or select channel 1 as the sample source.

Knob spacing is 1". Plenty of room.

SMT parts are used. Tolerances are better than through hole components.

Power Capacitors are Tantalum type.

More utilities

All utilities